Recent Posts

Tuesday 25 September 2018

1 comments

Layman’s Guide to Replace iPhone7 Screen

All the Apple screens are beautiful to be sure. But, you never know when that glass break if dropped smashed or chipped against hard surfaces and beauty is gone. The guidance to the replacement of screen is available online. You just need to pick your model. In this article, you’ll come to know about the hassle-free iphone 7 replacement screen.
Just follow these 9 steps 






1. Purchase a Screen Protector: Screens are easily available online. Buy the screen if the old screen is completely shattered. Replacement of screen will maintain water-resistance.

2. Fix an Appointment with Esourceparts Store: The technology of iPhone 7 is complicated. It won’t be easily understood. Therefore, call for the professional help. Moreover, it would be budget-saving if you go with Esourceparts Store.

3. Replace the Screen Yourself: Keep these two sub-steps in mind-
·   Press the power button and while holding it press the volume down button located on the      left side of your phone.
·         
Keep a hold on both the buttons until an Apple logo is visible on the screen.

4. Take out the Tools and Parts: With the help of magnetic mat and screw capsules, every part of the model will be organized well. All you need is spudger, iPhone7 LCD assembly, head screwdriver, screwdriver, metal spudger, heat gun, and tri-point screwdriver.


5. Switch off Your iPhone and Heat it Up: Initiate the process by heating interior’s adhesive strips with a heat gun or dehydrator. Give a heat at low flame with care.

6. Open the iPhone: At the bottom edge of the phone, remove two screws. From lightening port, use the metal spudger and slowly separate the screen from the phone. The device will open like a book. Don’t separate the screen from the fourth side.

7. Detach the Cables: Remove silver EMI shield located at the mid-right side of the phone. Use a spudger to disconnect the battery from the logic board. Then, easily dispatch the display connector flex cable. Now, you are left with separating the panel sensor connector cable that connects a screen to the iPhone’s body.

8. Disconnect Earpiece and Front Camera: After removing the five head screws from the top of the LCD assembly, pull the camera up and out. Along with it, remove the earpiece speaker. Similarly, remove the home screen and touch ID.

9. Insert the Screen: From the home button, insert the new screen.
Now re-install the parts and vigilantly follow the instructions for proper maintenance. Also, other iphone 7 repair parts are also available.



Watch Complete REPAIR Guide for iPhone 7 Srceen (LCD + Digitizer)


If you really enjoyed the video then hit the like button, comment your suggestions, share it with your friends, And don't forget to subscribe the channel, Thanks!



1 comments:

Best viewed on firefox 5+
Copyright © Design by Dadang Herdiana